Ozone removal filter/Aluminum honeycomb ozone decomposition catalyst
Main parameters
| Appearance | Black honeycomb |
| Carrier | Porous aluminum honeycomb, microporous hexagonal length of 0.9, 1.0, 1.3, 1.5mm and other sizes |
| Active ingredients | Manganese based nano composites |
| Diameter | 150*150*50mm or 100×100×50mmor customize |
| Bulk density | 0 .45 - 0.5g/ ml |
| Applicable ozone concentration | ≤200ppm |
| Operating temperature | 20 ~ 90℃ is recommended, the higher the temperature is, the better the effect is, and the effect decreases obviously when the temperature is below -10℃. |
| Decomposition efficiency | ≥97%（Final result be different according to actual working conditions） |
| GHSV | 1000-150000 h-1 |
| Decomposition Efficiency | ≥97%(20000hr-1,120ºC,Final result be different according to actual working conditions) |
| Air pressure drop | In the case of 0.8m/s wind speed and 50MM height, it is 30Pa |
| Service life | 1 years |
Advantage of Aluminum honeycomb ozone decomposition catalyst
A) High content of active ingredients, stable and durable performance.
B) Safety in use. Free of volatile components and combustible components, safe to use, no secondary pollution. Non-dangerous goods, easy to store and transport.
Shipping,Package and storage
A) Generally, the products need to be customized, and we can deliver the cargo within 8 working days.
B) The products are packed in cartons.
C) Pls avoid water and dust, sealed at room temperature when you store it.
Application
A) Household disinfection cabinet
After the household disinfection cabinet is used, the residual ozone inside will cause harm to the human body. Xintan aluminum honeycomb ozone decomposition catalyst can effectively decompose the residual ozone to O2.
B) Printers
The printer will produce a pungent odor during use, which is actually from the ozone produced. The residual ozone gas in the room can cause harm to the human body. We can install aluminum honeycomb ozone decomposition catalyst in the printer's exhaust port to destruct ozone gas.
C) Medical equipment
Ozone technology has been widely used in medical equipment, such as medical ozone treatment equipment, medical wastewater treatment, medical disinfection equipment and so on. Aluminum honeycomb ozone decomposition catalyst can effectively decompose these residual low concentration ozone gases.
D) Cooking device
When cooking food, there will be much smoke and grease. The cooking device is integrated with ventilation system, and a series of filters removes smoke and grease particulates before exausting clean air. Aluminum honeycomb ozone decomposition catalyst can be assembled in the filtration process to eliminate odors.
Technical service
Based on working temperature, humidity , Airflow and Ozone concentration. Xintan team can offer advice on the size and quantity needed for your device.
Remark:
1.The height to diameter ratio of catalyst bed is 1:1, and the greater the height
to diameter ratio, the better the effect.
2.Wind speed is not higher than 2.5 m/s, the lower the wind speed, the better.
3.The optimal reaction temperature is 20℃-90℃, lower than 10℃ may reduce the efficiency of the catalyst; Proper heating helps to improve the efficiency of the catalyst.
4.It is recommended that the humidity of the working environment be lower than 60%. High humidity working environment will reduce efficiency of catalyst and shorten the service life.A dehumidifier can be installed to the front section of the honeycomb catalyst.
5.When the catalyst is used for a certain period of time, its activity will decline due to the accumulation of moisture absorption. The catalyst can be taken out and placed in the 120℃ oven for 8-10 hours ,It can be taken out and exposed to the strong sun if oven is not available, which can partially restore the performance and reuse it.
